- Product Details
- Clinical Technique
- Technical Details
Peak™ Universal Bond adhesive's versatile formulation is ideal for indirect and direct bonding, including post and core procedures. With 7.5% filler, its viscosity has been optimized for minimal film thickness (2μm) and superior strength. The addition of chlorhexidine in Peak Universal Bond adhesive may provide the added benefit of improving long-term bond strengths.
- Universal adhesive can be used in all bonding procedures, direct and indirect
- Proven superior bond strengths1-4
- Added chlorhexidine can ensure long-lasting bonds5-8
- Available in syringe or bottle delivery
Indications for Use
Use Peak Universal Bond adhesive for all etching and bonding needs in restorative dentistry.
Peak Universal Bond Adhesive Step by Step
– See Instructions for Use for complete instructions, warnings, and precautions.
A. Total-Etch: Etch for 20 seconds with Ultra-Etch etchant, then suction, rinse for 5 seconds, and dry
B. Self-Etch: Scrub Peak SE Primer into preparation for 20 seconds and air thin
Place 1–2 drops of Peak Universal Bond adhesive into well
Dip applicator brush into well
Use applicator brush to apply Peak Universal Bond adhesive, scrubbing for 10 seconds
Air dry with half pressure for 10 seconds
Light cure with VALO™ LED curing light for 10 seconds in standard mode
NOTE: If using syringe, affix Inspiral™ Brush tip. Test expression before applying. Follow steps 4–6.
Simple Delivery to Superior Bonding
Peak Universal Bond adhesive is delivered to the preparation site with the convenient applicator brush.
Highest Bond Strengths to Both Dentin and Enamel
A university study1 conducted at Dalhousie University in Halifax, Nova Scotia, Canada, compared the shear bonding strengths of five bonding systems. The results showed that the Peak Universal Adhesive System yielded the highest bond strengths to both dentin and enamel. An additional internal study9 conducted by Ultradent’s R&D team tested 15 materials for shear bond strength. Seven specimens of dentin or cut enamel were made for each set. All sets were prepared according to manufacturer’s instructions and bond strength testing was conducted according to Ultradent’s testing methods, which were since adopted by the ISO as a standard for testing. The strengths were recorded and averaged. The Peak Universal Adhesive System recorded the highest bond strengths on both dentin and enamel.
Ideal for All Bonding Procedures
The Peak Universal Adhesive System features a universal bonding agent that is compatible with both self-etch and total-etch techniques. Its universal formulation works with all bonding substrates—including dentin, enamel, porcelain, metal, composite, and zirconia—and it provides superior bond strengths, making it the ideal choice for all bonding procedures.
Because bonding success begins with a quality etch, both Peak™ SE Primer and Ultra-Etch™ etchant are formulated to create an optimally prepared surface for bonding-resin penetration. When Peak Universal Bond adhesive is applied to the prepared surface, the result is unsurpassed bond strength and complete resin impregnation without voids, which reduces the possibility of residual patient sensitivity.
Saves Time and Money
Because Peak Universal Bond adhesive can be used for all direct and indirect bonding procedures, including post and core procedures, it saves you time and money by eliminating the need for material-sensitive products and reducing inventory in your office.
Contains Chlorhexidine for Enhanced Bond Strengths
Peak Universal Bond adhesive's unique formulation contains a 0.2% concentration of chlorhexidine, which may ensure long-term bond strengths.5-8
Two Delivery Options
Peak Universal Bond adhesive is available in two delivery options: syringes for intraoral control, minimal waste, and preservation of critical, oxygen-sensitive ingredients, and bottles for easy dispensing and convenient delivery with an applicator brush.
- INTRO: EACH
- BOTTLE: EACH
- N/A: 4-PACK, *20-PACK
- INSPIRAL BRUSH TIPS: 20-PACK, 100-PACK, 500-PACK
*SPECIAL ORDER PRODUCT: Product is not stocked in our warehouse and is only requested when an order is placed for said product. This product is ineligible to be returned.
Q: I’ve been a PQ1™ single-resin bonding agent user for a long time. Why would I want to switch to Peak Universal Bond adhesive?
A: Peak Universal Bond adhesive is the result of years of research and development, and there are a lot of advantages Peak Universal Bond adhesive offers. For example, Peak Universal Bond adhesive is only 7.5% filled where PQ1 single-resin bonding agent is 40% filled, yet Peak Universal Bond adhesive offers higher bond strengths than PQ1 bonding agent (71.3 MPa vs. 62.8 MPa, respectively). Also, Peak Universal Bond adhesive works with both self-etch and total-etch techniques while PQ1 bonding agent only works with the total-etch technique. Finally, Peak Universal Bond adhesive includes chlorhexidine (0.2%), which may ensure long-term bond strengths.5-8 PQ1 bonding agent does not.
Q: What substrates does Peak Universal Bond adhesive adhere to?
A: Like its name implies, Peak Universal Bond adhesive is truly a universal bonding agent. It provides excellent bond strengths on dentin, enamel, composite, metal, porcelain, and zirconia.
Q: Can I use a chlorhexidine product like Consepsis™ antibacteral solution in conjunction with Peak Universal Bond adhesive?
A: Yes, but the appropriate time to use it will depend on the technique you use. If you’re using a self-etch technique, apply the chlorhexidine before etching. If you’re using a total-etch technique, apply chlorhexidine after the etchant has been rinsed and before Peak Universal Bond adhesive is placed.
View the Peak Universal Bond Sales Sheet.
View article Simple, Beautiful and Predictable Class V Restorations featuring Marc Geissberger DDS, MA.
1Price RB, McLeod M, Felix CM. Bond strengths of self-etching bonding systems to dentin and enamel. J Dent Res. 87(Spec Iss A):0825, 2008 (www.dentalresearch.org).
2Clinicians Report, Volume 3, Issue 6, June 2010.
3Burgess J, Cakir D. Shear bond strength comparison of six adhesives to dentin with and without the application of chlorhexidine. 2010. Data available upon request.
4In-house testing shows the superior bond strengths of Peak Universal Bond. Data available upon request.
5Carrilho MRO, Carvalho RM, de Goes MF, et al. Chlorhexidine preserves dentin bond in vitro. J Dent Res. 2007;86(1):90–94.
6Carrilho MRO, Geraldeli S, Tay F, et al. In vivo preservation of the hybrid layer by chlorhexidine. J Dent Res. 2007;86(6):529–533.
7Brackett WW, Tay FR, Brackett MG, Dib A, Sword RJ, Pashley DH. The effect of chlorhexidine on dentin hybrid layers in vivo. Oper Dent. 2007;32(2):107–111.
8Vargas M. Ultramorphological evaluation of the resin-dentin-enamel interface produced by three proprietary self-etching adhesive systems. 2007. Data on file.
9Data on file.