Komet's 6881 is a parallel chamfer diamond bur. Coarse grit (green band), 151 microns. Matches H339 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 379EF is an egg/football shape diamond with an extra-fine grit (25 microns). Perfect for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fil...
The Komet 6379 is an egg-shaped diamond preparation bur. Matches H379 carbide finisher series.
Size: 023
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 300,000
Indications for Use
Cr...
8856P is a fine grit, tapered chamfer, round diamond bur. Creates a cutting depth of 0.30 mm (size 016), 0.38 mm (size 018) or 0.54 mm (size 021) at the crown margin.
8856P is a part of the Pin-Dia...
Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR-Diamonds™
Offering...
Komet's 5847 is a tapered shoulder, super coarse (180 microns) diamond bur for preparing the tooth for a shoulder crown preparation. Matches H375 carbide finisher series.
Due to its small size the ...
Modified tapered shoulder - matches 847KRXC Deep Purple™ diamond preparation bur and 8847KR diamond series - 12 blades, normal.
Indications for Use
Crown preparation.
Looking for a way to easily sw...
Komet's FSD9EF (sometimes referred to as 859EF) is a tapered point, extra-fine grit (yellow) facial surface trimming diamond.
This diamond bur shape is also available in the ultra-fine grit (white ...
Tapered chamfer. Other features and benefits include:
L1 in mm: 8.0 mm
Angle: 2°
Indications for Use
Crown and veneer preparation
Looking for a way to easily switch to Komet burs? Download and t...
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
838M is a diamond round cylinder bur with a modified shoulder and long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Ma...
Komet's 392EF is an interproximal trimming "mosquito" needle-shaped diamond bur. Extra Fine (25 µm) diamond grit.
Other features include:
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 5.0 mm
Max...
Komet's ZR379 is an egg-shaped, diamond bur used for grinding all types of ceramics, including zirconia. Medium grit.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 2.8 mm
Maximum Speed: 450,000
...
Komet's 858 is a needle-shaped diamond bur. Medium grit, 107 microns.
Ideal for occlusal onlays, the separation step: Prepare the interproximal region with the separating instrument 858 in an axial...
Modified tapered chamfer - matches H283K carbide finisher series and 878KXC Deep Purple™ diamond preparation bur.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet ...
LD/ZR Prep Kit - LD1316A is used for all-ceramic preparation.
The kit contains the following Komet burs:
5858.FG.014 - Narrow Taper for Breaking Contact
379XC.FG.023 - X-Coarse Football
843KRA....
889M is a lance-shaped (small flame) diamond bur with a slim neck ideal for micro preparation. Medium grit, 107 microns. Available in FG and FGSS shanks.
Specifications:
Size: 007
Size Ø: 007 ...
Komet's 845 is a flat-end taper diamond preparation bur for inlay/onlay preparation. Medium grit, 107 microns.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way ...
ZR8801L is a round diamond bur for grinding all types of ceramics, including zirconia. ZR8801L is a part of the ZR-Diamonds™ series. Available in FGL (Friction Grip Long) shank.
Size: 010
Size Ø: ...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's 5858 is a pointed, thin, and tapered super-coarse diamond bur for facial surface trimming, interdental separation, and breaking contact.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 8.0 m...
The CeraBur® K1SM facilitates controlled, intuitive excavation, enabling the user to feel when the instrument leaves the carious, soft dentin. The outstanding efficiency of the CeraBur K1SM was sho...
Komet's 6835KR is a cylinder-shaped modified short diamond bur with the coarse grit (green band). Features rounded edge. Available in three sizes in FG (Fiction Grip) shank.
Indications for Use
Cav...
Crosscut tapered fissure.
Indications for Use
Oral surgery, cavity preparation or crown and bridge technique.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur C...
856P is a tapered chamfer, round diamond bur. Creates a cutting depth of 0,30 mm (size 016), 0,38 mm (size 018) or 0,54 mm (size 021) at the crown margin.
Maximum Speed: 160,000
Angle: 2°
Cro...
Komet's 8951KR is a modified tapered shoulder diamond preparation bur featuring longer total length and special mid-sizes. Fine grit, 46 microns (red band).
L1 in mm: 8.0 mm
Angle: 2°
Indicat...
Komet's 830AM is a long neck diamond bur for micro preparation, pear-shaped. Medium grit, 107 microns.
Micro pear tip
Medium grit 107 microns diamond
L1 in mm: 2.7 mm
Maximum Speed: 160,000
Indic...
Modified cylinder short.
Indications for Use
Cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:
Click Here
Clinical Tech...
