Komet's 822 is a diamond preparation bur with a small pear-shaped head. Medium grit, 107 microns.
L1 in mm: 2.0 mm
Maximum Speed: 450,000
Indications for Use
Cavity preparation.
Looking for ...
955EF is an extra-fine grit (yellow) pointed diamond used for facial surface trimming. Sometimes referred to as FSD3EF.
Matches H132/FS3 carbide finisher bur. For more coarse version of this bur se...
KS3SC is a parallel chamfer diamond prep bur. Matches H881U carbide prep series.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Komet's 6837 is a parallel shoulder diamond preparation bur. Coarse grit (green band), 151 microns.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download...
Komet's ZR6881 is a coarse, cylinder round-shaped diamond bur for cutting all-ceramics. Part of the ZR-Diamonds™ series. It's one of the best-selling Komet diamond burs.
The ZR6881 is ideal for gro...
The 8801 is a fine grit round finishing diamond. For the finishing step in the filling procedure.
Also available in other grits:
801EF (extra-fine) diamond bur
6801 coarse grit diamond bur
801 med...
Komet's 813 is a double inverted cone diamond bur. Medium grit (107 microns). For a longer doubled inverted head, choose 806 double inverted long diamond bur.
Indications for Use
Cavity preparation...
Komet's KS0F is a parallel chamfer diamond bur with the fine grit (46 microns) and a fiction grip shank. A part of the KS Diamonds series.
Size: 010
Size Ø: 010 1/10 mm
L1 in mm: 7.0 mm
Ma...
8849P is a round-end taper pin diamond bur with fine grit (46 microns). Creates a cutting depth of 0.43 mm at the crown margin. Additionally, used during occlusal onlays prep to work on oro-vestibu...
S6801 Round - Matches H41 Round Tungsten Carbide Operative Bur.
Cavity Preparation | S-Diamonds®
In dental surgery, the primary preparation of crown cores is one of the most time-consuming steps du...
Komet's 5909 is a round edge wheel super-coarse diamond for mesial occlusal distal (MOD) gross reduction.
Size: 040
Size Ø: 040 1/10 mm
L1 in mm: 1.3 mm
Maximum Speed: 100,000
T: 1,2 mm
Indicatio...
Komet's 801EF is an extra-fine grit round finishing diamond.
Also available in other grits:
8801 fine diamond finishing bur
6801 coarse grit diamond bur
801 medium grit preparation diamond bur
In...
Komet's FS4 / H133 is a tapered point, (8 blade / red) carbide used for composite finishing. Matches 8956/FSD4F diamond series. Other features and benefits include:
Non-cutting tips minimize tissu...
Komet's ZR8850 is a tapered long diamond bur. Fine grit (red and white bands), 46 microns. For grinding all types of ceramics, including zirconia.
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 10....
ZR8379 is an egg-shaped diamond bur for grinding all types of ceramics including zirconia. Fine grit.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 2.8 mm
Maximum Speed: 450,000
This ZR egg-sha...
Konet's H1S is a round tungsten carbide bur with a high-efficiency cutting design.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way to easily switch to Komet bu...
The Zekrya Gingival Protector provides protection for your patient and convenience for you. With the Zekrya Gingival Protector, you can retract soft tissue to protect gingiva from rotary instrument...
Komet's 379XC Deep Purple™ is an egg/football-shaped diamond bur for occlusal/lingual reduction featuring extra-coarse grit. Matches 8379 diamond series and H379 carbide finisher series.
Crown Prep...
Pointed.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Technique
Technic...
Komet H31R is a round-end cross-cut fissure tungsten carbide bur. Can be used for cavity preparation, dental surgeries, and in the finishing workflow after 3D printing crowns.
Bur numbers and corre...
959KRD is a modified tapered shoulder diamond bur with the depth markings at 2 and 4 mm. Other features and benefits include:
Flat ended
Rounded corner
Size Ø: 018 1/10 mm
L1 in mm: 5.5 mm
Maximum...
Short parallel step, rounded edge.
Indications for Use
Max. RPM: 450,000
Size Ø: 014 1/10mm
Length: 6.0mm
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Co...
LD/ZR Prep Kit - LD1487A is used for all-ceramic chamfer preparations.
The kit contains the following Komet burs:
5858.FG.014 – Narrow Taper Diamond for Breaking Contact
379XC.FG.023 – Football-...
Flame - for grinding all types of ceramics including zirconia.
ZrO2 | ZR-Diamonds™
Offering a combination of strength, durability, and outstanding esthetics, all-ceramics are a popular restorative ...
H7S tungsten carbide bur is pear-shaped with a high-efficiency cutting design ideal for excavating.
L1 in mm: 1.8 mm. Maximum Speed: 450,000.
Bur numbers and corresponding Komet numbers:
#330 1/...
Komet's ZR6274 is a round-end flame-shaped diamond bur for grinding all types of ceramics including zirconia. ZR6274 is a part of the ZR-Diamonds™ series.
Size: 016
Size Ø: 016 1/10 mm
L1 in...
Modified tapered chamfer - matches 878KXC Deep Purple™ diamond preparation bur and 878K diamond series - 10-12 blades depending on size.
Indications for Use
Crown preparation.
Looking for a way to ...
The CTT™ Ceramic Tissue Trimmer is a rotating instrument designed to replace both electrosurgery and surgical blades, while also eliminating the need for retraction cord in many procedures. It deli...
