Clinical Research Dental: Komet Carbides

CRD Advantage+: Get Bioclear™ Evolve or Black Triangle Matrix Refills at 5+2 + FREE 5-pack of any Komet burs.
Add all items to your cart! 🎁

Komet Carbides

Komet Carbides

Komet Carbides

Komet Carbides

133 products

Discover high-quality tungsten carbide dental burs made in Germany. Available in a range of shapes, sizes and number of blades for cavity prep, crown removal, amalgam removal, finishing, and more. Read how tungsten carbide burs are made or learn more about carbide burs' colouring system. To request a bur demonstration, book an appointment with your local Clinical Advisor.

Komet H1SML31 Round EndoTracer Bur

Komet H1SML31.205.006 EndoTracer Bur

The EndoTracer is a special instrument intended for the preparation of the endodontic access cavity, notably in the preparation of isthmuses. The root canals of multi-rooted teeth tend to be diffic...

Komet H379Q Tungsten Carbide Palatal/Occlusal Q-Finisher Bur

Komet H379Q.FG.018 Carbide Bur

Komet's H379Q is a football-shaped tungsten carbide bur with unique cross-cut toothing that makes palatal/occlusal adjustments, composite finishing, and debonding more accurate and efficient. Until...

Komet H245 Pear Tungsten Carbide Operative Bur a.k.a.

Komet H245.FG.007 Carbide Bur

H245 is a tungsten carbide operative bur, pear-shaped, with a length of 2,8 mm. H245 can be used for cavity preparation, trimming, and finishing. H245 in size 008 is also referred to as 245 bur. Ma...

Komet H22ALGK Round End Orthodontic Adhesive Removal Burs

Komet H22ALGK.FG.016 Adhesive Removal Bur

Komet's H22ALGK is an orthodontic adhesive removal tungsten carbide for labial surfaces. The bur features a safe end and golden shank. For quick and safe removal of adhesive residues after debondin...

Komet H31 Cross Cut Fissure Tungsten Carbide Operative Bur

Komet H31.FG.008 Carbide Bur

Komet H31 is a cylinder carbide featuring cross-cut fissures and used for cavity preparation and for bone cutting in oral surgeries. H31 is available with a friction grip (FG), friction grip short ...

Komet H40 Tungsten Carbide Crown Remover Bur

Komet H40.FG.012 Carbide Bur

For cutting through full metal and PFM restorations during endodontic access. Golden shank. Apply the crown remover at an angle of 45°. Indications for Use Crown removal. Looking for a way to easil...

Komet H246 Flame Tungsten Carbide Bur

Komet H246.FG.010 Carbide Bur

Komet's H246 is a flame-shaped tungsten carbide bur with 12 blades. Used for trimming and finishing. The most popular sizes in FG and HP shanks are: H246.009 is the US size 7901 H246.010 is the...

Komet H33L Crosscut Tapered Fissure Tungsten Carbide Operative Bur

H33L details and sizes

Komet's H33L is a cross-cut tapered fissure long operative tungsten carbide bur. Also available in HP shank. Available in US Numbers: 699L - Komet's 009 700L - Komet's 010 701L - Komet's 012...

Komet H4MCXL Tungsten Carbide Crown Removal Bur

Komet H4MCXL.FG.014 Tungsten Carbide Bur

The H4MCXL is a tungsten carbide crown cutter for metal and ceramics. Ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal ...

Komet H141 Round Tungsten Carbide Bone Cutter Bur

Komet H141.FGSL.010 Carbide Bur

Komet's H141 tungsten carbide is a metal and bone cutter, round, with high-efficiency cutting design. Indications for Use Oral surgery. Looking for a way to easily switch to Komet burs? Download an...

Full H23VIP Komet Bur

Komet H23VIP Bur up close and in detail

Komet's H23VIP is an adhesive removal and debonding carbide. It is designed with sharp blades made from zirconium nitride (ZrN) to efficiently yet gently remove hard materials during orthodontic pr...

Komet H246Q Tungsten Carbide Occlusal Q-Finisher Bur

Komet H246Q.FG.009 Tungsten Carbide Q-Finisher Bur

Komet's H246Q is a pointed carbide used for occlusal adjustment, debonding and composite finishing. H246Q is a part of the Q-Finishers® series. Until recently, composite restorations required three...

Komet H135Q Facial/Labial Tungsten Carbide Q-Finisher Bur

Komet H135Q.FG.014 Carbide Q-Finisher Bur

Komet's H135Q (FS9Q) is a tungsten carbide bur for working on composite fillings located on the facial/labial surface. H135Q (FS9Q) is a part of the Q-Finishers® carbide series, which allows you to...

Komet H48LQ Tungsten Carbide Facial/Labial Q-Finisher Bur

Komet H48LQ.FG.012 Carbide Bur

Komet's H48LQ is a tungsten carbide finisher for use on facial/labial surfaces. Unique cross-cut design is pressure sensitive, allowing for the same bur to remove the bulk and finish the surface...

Komet H246M Flame Tungsten Carbide Bur

Komet H246M.FG.009 Carbide Bur

Komet's H246M is the Midwest Version (MWV) tungsten carbide finishing bur which has a gold coated shank and is a flame-shaped with 12 blades. The US numbers for H246M sizes are: H246M.009 is th...

Komet H2 Inverted Cone Tungsten Carbide Preparation Bur

Komet H2.FG.006 Tungsten Carbide Bur

Komet's H2 is an inverted cone-shaped tungsten carbide used for cavity prep. Bur sizes and corresponding Komet numbers. Shanks may vary: #33 1/2: H2.006 #34: H2.008 #34 1/2: H2.009 #35: H2...

H4MCL PFM crown cutter tungsten carbide bur

Komet H4MCL.FG.012 Carbide Bur

The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...

Komet H134Q Facial/Labial Tungsten Carbide Q-Finisher Bur

Komet H134Q.FG.014 Q-Finisher Carbide Bur

Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...

Komet H1SE Round Tungsten Carbide Operative Bur

Komet H1SE.RA.008 Carbide Bur

H1SE is a round tungsten carbide bur with a high-efficiency cutting design for excavating and cross-cut. H1SE (blue) shows reduced vibration compared to conventional round burs. Features sta...

Komet H274Q Occlusal Tungsten Carbide Q-Finisher Bur

Occlusal - cutting tip. Composite | Q-Finishers Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...

Komet H35L Tungsten Carbide Removal Bur

Komet H35L.FG.012 Carbide Bur

The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...

Komet H34L Crown Removal Tungsten Carbide Bur

Komet H34L.FG.012 Carbide Bur

Komet's H34L is an intra-oral tungsten carbide crown remover used to quickly and easily remove metal and non-precious metal crowns and appliances. Apply crown remover at an angle of 45° to the crow...

Komet H269 Tapered Tungsten Carbide Bone Cutter Bur

Komet H269.FG.016 Carbide Bur

Komet's H269 is a tapered tungsten carbide bone cutter bur also known as a Lindemann bur. Oral and maxillofacial surgeries. Indications for use: Bone cutting: Lindemann burs are used for aggre...

Komet H33RS Crosscut Tapered Fissure Round End Tungsten Carbide Operative Bur

Komet H33RS.FG.010 Carbide Bur

H33RS is a surgical tungsten carbide bur featuring crosscut tapered fissure and a round end - high-efficiency cutting design. H33RS.FG.010 is also known as 1700S H33RS.FG.012 is also known as ...

Komet H1 Round Tungsten Carbide Operative Bur

Komet H1.HP.005 Carbide Bur

Round shaped. HP shank. Also available in other shanks. US Numbers and the corresponding Komet Bur Number: #1/4: H1.005 #1/2: H1.006 #1: H1.008 #2: H1.010 - one of the most popular burs #3: H1.01...

H251EQ Tungsten Carbide Lab Cutter

Carbide milling cutter EQ For rough processing of denture base plastics The specially developed EQ toothing gives the carbide milling cutter the property of an "intelligent" dual milling cutter. Th...

Komet H1S Round Tungsten Carbide Preparation Bur

Komet H1S.FG.010 Carbide Preparation Bur

Konet's H1S is a round tungsten carbide bur with a high-efficiency cutting design. Indications for Use Crown and bridge technique, cavity preparation. Looking for a way to easily switch to Komet bu...

H254LE tungsten carbide oral surgery

H254LE tungsten carbide oral surgery bur with transversing tip

Komet's H254LE is 31 mm in length, tapered tungsten carbide bur with a transverse tip for conservative preparation of bone tissue and hard tooth structure. Features and benefits include: Tissue-...

H257EF Komet Cutter

For acrylics and metal alloys. Sold individually. Other features and benefits include: Size Ø: 023 1/10 mm L1 in mm: 13.0 mm Maximum Speed: 100,000 Indications for Use Crown and bridge technique...

Komet H269GK Tapered Tungsten Carbide Preparation Bur

Komet H269GK.FG.012 Tungsten Carbide Preparation Bur

Komet H269GK safe-ended tapered carbides are long, tapered burs that create a shape conducive to easier access in the pulp chamber floor. Safe-ended, noncutting tip prevents perforation of the pulp...

Komet H33 Cross Cut Tapered Fissure Tungsten Carbide Preparation Bur

Komet H33.FG.009 Carbide Bur

Crosscut tapered fissure. Indications for Use Oral surgery, cavity preparation or crown and bridge technique. Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur C...

Komet H7S Pear Tungsten Carbide Preparation Bur

Komet H7S.FG.009 Carbide Bur

H7S tungsten carbide bur is pear-shaped with a high-efficiency cutting design ideal for excavating. L1 in mm: 1.8 mm. Maximum Speed: 450,000. Bur numbers and corresponding Komet numbers: #330 1/...