Komet's H246Q is a pointed carbide used for occlusal adjustment, debonding and composite finishing. H246Q is a part of the Q-Finishers® series.
Until recently, composite restorations required three...
Komet's 9523UF and 9525UF polishers incorporate ultra-fine grit diamond particles to efficiently provide a high-shine polish following the thorough finishing of restoration surfaces. They also feat...
Komet's 5835 is a cylinder short diamond bur. Super coarse, 180 microns. Available in a Fiction Grip shank (FG) and Fiction Grip Short Shank (FGSS).
Indications for Use
Cavity preparation for inlay...
Komet's 5850 is a tapered chamfer long diamond bur. Super coarse (180 microns).
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Komet's 5379 is a super-coarse, egg-shaped diamond bur used for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fillings.
Looking for a way to easil...
Komet's 305 mandrel is used for discs, polishers and brushes. Other features include:
Made from stainless steel
Sizes: 050 (050 1/10 mm) and 080 (080 and 1/10 mm)
Maximum Speed: 15,000 for the siz...
Komet's H135Q (FS9Q) is a tungsten carbide bur for working on composite fillings located on the facial/labial surface. H135Q (FS9Q) is a part of the Q-Finishers® carbide series, which allows you to...
Komet's H141 tungsten carbide is a metal and bone cutter, round, with high-efficiency cutting design.
Indications for Use
Oral surgery.
Looking for a way to easily switch to Komet burs? Download an...
Komet's H375R is a tapered chamfer tungsten carbide finishing bur. Matches 856XC Deep Purple™ diamond preparation bur and 8856 diamond series. 12 blades, normal. Available in FG and FGSS shanks.
So...
H33RS is a surgical tungsten carbide bur featuring crosscut tapered fissure and a round end - high-efficiency cutting design.
H33RS.FG.010 is also known as 1700S
H33RS.FG.012 is also known as ...
Komet's FS9 (H135) is a facial surface trimming carbide bur. Matches 8859/FSD9F diamond series. FS9 (H135) is a tapered cone, fine carbide (8 blades, red band) with a working length of 9 mm. Other ...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
Komet's LD2541 EndoTracer kit contains 10 x EndoTracers which are minimally invasive, petite round burs with a long, slim neck used for accurate retrieval of all canal openings and isthmuses trough...
Komet's 15802 is a round-end tapered, coarse grit (green) diamond used for reaming and endo access cavity preparation.
The 15802’s unique shape has a round-end for initial access and the diamond ta...
S6830L Pear - Matches H47L carbide finisher series.
Cavity Preparation | S-Diamonds®
The opening of the cavity and the initial preparation are noticeably simplified with the help of these structure...
Komet's 8956 (also known as FSD4F) short pointed diamond bur with a fine grit (red band) for facial trimming. Matches H133/FS4 carbide finisher series.
Specifications:
Size: 010
Size Ø: 010 1/10 m...
The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...
The 8852 bur is also referred to as FSD6F bur (facial surface trimming bur, 6 mm, fine).
Komet's 8852 (FSD6F) is a tapered point, fine grit (red) facial surface trimming diamond.
Matches H134/FS6 c...
Komet's ZR8379L is an egg-shaped diamond bur with a long neck. For grinding all types of ceramics including zirconia. It is a part of ZR-Diamonds™ series.
About ZrO2 | ZR-Diamonds™
Offering a combi...
Komet's 8845KR is a modified taper diamond bur with a round edge for inlay/onlay preparation. Fine (red band), 46 microns.
Indications for Use
Inlay and onlay preparation.
Looking for a way to easi...
Komet's H2 is an inverted cone-shaped tungsten carbide used for cavity prep.
Bur sizes and corresponding Komet numbers. Shanks may vary:
#33 1/2: H2.006
#34: H2.008
#34 1/2: H2.009
#35: H2...
Komet's 8957 (US Numbers OSD3 and OSD2) prep diamond matches H247/OS2, OS3 carbide finisher series. 8957 (OSD3, OSD2) has a fine grit (red band), 46 microns.
Indications for Use
Working on filling...
The 379 diamond bur is medium grit, football/egg shaped and used for occlusal adjustments.
Matches the following carbide finishers: H379 and H379Q.
Indications for Use
Crown and bridge technique, ...
Komet's KS2SC is a parallel chamfer diamond prep bur, super coarse (180 microns). Matches H881U carbide prep series.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Kom...
Komet's 5847KR is a super-coarse (180 microns) modified tapered shoulder diamond bur. Matches H336 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 9644F is a fine-grit, extra-oral polisher for high-shine polishing of plastic/acrylic dentures. Comes in a 5-pack. 9644F is a part of the 4543 Acrylic Polisher Kit. Other features of the pr...
Komet's 6844 is a two-grit, long tapered chamfer diamond used for veneer preparation.
Tthe long portion of the working length is coarse grit (green) and is used for roughening of facial surfaces. T...
Komet 868B is a depth marker for veneer technique. Tapered. Cutting depth - Matches 868 diamond preparation instrument. Other features and benefits include:
L1 in mm: 7.0 mm
Maximum Speed: 16,000
...
Komet's 8889 is a flame-shaped (needle) small preparation diamond bur. Fine grit, 46 microns.
For micropreparation, consider using 889M Small Flame Micropreparation Diamond Bur.
Indications for Us...
H269QGK is an EndoGuard, cross-cut bur for endodontic chamber preparation with a non-cutting tip. Works well in conjunction with the Komet® 15802 Root Canal Preparation Diamond Bur for optimal acce...
