Komet's 6881 is a parallel chamfer diamond bur. Coarse grit (green band), 151 microns. Matches H339 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 4543 Acrylic Polisher Adjustment Kit includes all the polishers needed for pre-polishing, polishing and high-shine polishing of acrylics.
Kit Contents
4543.HP Acrylic Polisher Adjustment Ki...
Komet's 9641M is a medium-grit extra-oral acrylic polisher. Comes in a 5-pack. 9641M is a part of the 4543 Acrylic Polisher Kit. Other features:
Recommended Speed: 6,000
Size: 100
Size Ø: 10...
801M is a diamond bur, round, with a long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications
Size: 010
Size Ø: 010 1/10 mm
Maximum Speed: 160,000
Indications for U...
Tapered chamfer short.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Techni...
Komet's 8888 is a feather edge Flame slim diamond bur.
Size: 012
Size Ø: 012 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 300,000
Indications for Use
Working on fillings, occlusal onlays.
Looking for ...
Komet's 379EF is an egg/football shape diamond with an extra-fine grit (25 microns). Perfect for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fil...
The Komet 6379 is an egg-shaped diamond preparation bur. Matches H379 carbide finisher series.
Size: 023
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 300,000
Indications for Use
Cr...
Komet's FS6 (H134) is a facial surface trimmer with a safe-end tip. Features 8 blades, normal. Matches 8852/FSD6F diamond series. Also available as a fine facial surface trimmer - FS6F (H134F).
Spe...
8856P is a fine grit, tapered chamfer, round diamond bur. Creates a cutting depth of 0.30 mm (size 016), 0.38 mm (size 018) or 0.54 mm (size 021) at the crown margin.
8856P is a part of the Pin-Dia...
Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR-Diamonds™
Offering...
Komet's 5847 is a tapered shoulder, super coarse (180 microns) diamond bur for preparing the tooth for a shoulder crown preparation. Matches H375 carbide finisher series.
Due to its small size the ...
Modified tapered shoulder - matches 847KRXC Deep Purple™ diamond preparation bur and 8847KR diamond series - 12 blades, normal.
Indications for Use
Crown preparation.
Looking for a way to easily sw...
Komet's H34L is an intra-oral tungsten carbide crown remover used to quickly and easily remove metal and non-precious metal crowns and appliances. Apply crown remover at an angle of 45° to the crow...
Komet's FSD9EF (sometimes referred to as 859EF) is a tapered point, extra-fine grit (yellow) facial surface trimming diamond.
This diamond bur shape is also available in the ultra-fine grit (white ...
Tapered chamfer. Other features and benefits include:
L1 in mm: 8.0 mm
Angle: 2°
Indications for Use
Crown and veneer preparation
Looking for a way to easily switch to Komet burs? Download and t...
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
838M is a diamond round cylinder bur with a modified shoulder and long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Ma...
Komet's 392EF is an interproximal trimming "mosquito" needle-shaped diamond bur. Extra Fine (25 µm) diamond grit.
Other features include:
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 5.0 mm
Max...
Komet's ZR379 is an egg-shaped, diamond bur used for grinding all types of ceramics, including zirconia. Medium grit.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 2.8 mm
Maximum Speed: 450,000
...
Komet's 858 is a needle-shaped diamond bur. Medium grit, 107 microns.
Ideal for occlusal onlays, the separation step: Prepare the interproximal region with the separating instrument 858 in an axial...
Komet's 6837 is a parallel shoulder diamond preparation bur. Coarse grit (green band), 151 microns.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download...
Modified tapered chamfer - matches H283K carbide finisher series and 878KXC Deep Purple™ diamond preparation bur.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet ...
Komet's 9603C is a coarse-grit, extra-oral polisher for pre-polishing plastic/acrylic dentures. Comes in a 5-pack. 9603C is a part of the 4543 Acrylic Polisher Kit. Other features of the product:
...
S6837KR is a modified parallel shoulder 151-micron grit diamond bur. The rounded corners of S6837KR prevent the formation of micro cracks. L1 in mm: 8.0 mm. Matches H158 carbide finisher series.
Cr...
Komet's H274 is a round-end flame tungsten carbide bur ideal for finishing. Available in FG (Fiction Grip), FGSL (Fiction Grip Surgical Length), and HP (Handpiece) shanks.
Indications for Use
Worki...
889M is a lance-shaped (small flame) diamond bur with a slim neck ideal for micro preparation. Medium grit, 107 microns. Available in FG and FGSS shanks.
Specifications:
Size: 007
Size Ø: 007 ...
Komet's 845 is a flat-end taper diamond preparation bur for inlay/onlay preparation. Medium grit, 107 microns.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way ...
