Komet's 9523UF and 9525UF polishers incorporate ultra-fine grit diamond particles to efficiently provide a high-shine polish following the thorough finishing of restoration surfaces. They also feat...
Precision-coated with an aluminum-oxide grit, 3M Sof-Lex Finishing and Polishing Strips are designed to produce a smooth restoration surface to help prevent interproximal plaque build-up.
Easy-to...
Porcelize™ is a unique two-step diamond polishing paste that will create a high polish on your porcelain restorations. Porcelize is a two-grit system for porcelain: 1 micron (pink) and 3 microns (b...
Komet's H135Q (FS9Q) is a tungsten carbide bur for working on composite fillings located on the facial/labial surface. H135Q (FS9Q) is a part of the Q-Finishers® carbide series, which allows you to...
Komet's H48LQ is a tungsten carbide finisher for use on facial/labial surfaces.
Unique cross-cut design is pressure sensitive, allowing for the same bur to remove the bulk and finish the surface...
Modified tapered shoulder - matches 847KRXC Deep Purple™ diamond preparation bur and 8847KR diamond series - 12 blades, normal.
Indications for Use
Crown preparation.
Looking for a way to easily sw...
Komet's 379EF is an egg/football shape diamond with an extra-fine grit (25 microns). Perfect for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fil...
Komet's 392EF is an interproximal trimming "mosquito" needle-shaped diamond bur. Extra Fine (25 µm) diamond grit.
Other features include:
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 5.0 mm
Max...
Komet's FS9 (H135) is a facial surface trimming carbide bur. Matches 8859/FSD9F diamond series. FS9 (H135) is a tapered cone, fine carbide (8 blades, red band) with a working length of 9 mm. Other ...
Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...
Before cementation of conventional crowns, bridges and implant prosthetics, it is necessary to assess the relationship of the crown to the neighbouring teeth. Occlusion paper is often used to check...
For more polishers and brushes that are not on clearance clear here.
The time and effort you put into to crafting quality, natural-looking composite restorations can be of little use if the composi...
The CeriSaw is a hand-held, interproximal saw specially designed to remove excess composite in the contact areas, using one or both hands. Designed for fast, easy-to-use, interproximal finishing, t...
Komet's 9641M is a medium-grit extra-oral acrylic polisher. Comes in a 5-pack. 9641M is a part of the 4543 Acrylic Polisher Kit. Other features:
Recommended Speed: 6,000
Size: 100
Size Ø: 10...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's FS6 (H134) is a facial surface trimmer with a safe-end tip. Features 8 blades, normal. Matches 8852/FSD6F diamond series. Also available as a fine facial surface trimmer - FS6F (H134F).
Spe...
Komet's 9644F is a fine-grit, extra-oral polisher for high-shine polishing of plastic/acrylic dentures. Comes in a 5-pack. 9644F is a part of the 4543 Acrylic Polisher Kit. Other features of the pr...
The 8852 bur is also referred to as FSD6F bur (facial surface trimming bur, 6 mm, fine).
Komet's 8852 (FSD6F) is a tapered point, fine grit (red) facial surface trimming diamond.
Matches H134/FS6 c...
Komet's FSD9EF (sometimes referred to as 859EF) is a tapered point, extra-fine grit (yellow) facial surface trimming diamond.
This diamond bur shape is also available in the ultra-fine grit (white ...
Best solution for all-ceramic restorations. To meet the unique preliminary and final polishing requirements of all-ceramic materials at chairside, Komet ZR Flash Polishers have been developed to sm...
Komet's DS25 are diamond strips with various grits. Stainless steel, single-sided or double-sided.
Coarse (90 µm), green band, single-sided:
Width: 2.5 mm
Thickness: 0.18 mm
L1 in mm: 148 mm
M...
Komet's 4543 Acrylic Polisher Adjustment Kit includes all the polishers needed for pre-polishing, polishing and high-shine polishing of acrylics.
Kit Contents
4543.HP Acrylic Polisher Adjustment Ki...
Komet's 9603C is a coarse-grit, extra-oral polisher for pre-polishing plastic/acrylic dentures. Comes in a 5-pack. 9603C is a part of the 4543 Acrylic Polisher Kit. Other features of the product:
...
Komet's 8845KR is a modified taper diamond bur with a round edge for inlay/onlay preparation. Fine (red band), 46 microns.
Indications for Use
Inlay and onlay preparation.
Looking for a way to easi...
Modified tapered chamfer - matches 878KXC Deep Purple™ diamond preparation bur and 878K diamond series - 10-12 blades depending on size.
Indications for Use
Crown preparation.
Looking for a way to ...
Komet's FS4 / H133 is a tapered point, fine (8 blade / red) carbide used for composite finishing. Matches 8956/FSD4F diamond series. Other features and benefits include:
Non-cutting tips minimize ...
Best solution for all-ceramic restorations. To meet the unique preliminary and final polishing requirements of all-ceramic materials at chairside, Komet ZR Flash Polishers have been developed to sm...
Garrison®’s comprehensive FitStrip™ Interproximal Finishing and Contouring System has been expanded to include specialty strips for difficult-to-access subgingival areas. The new subgingival kit pr...
Garrison®’s comprehensive FitStrip™ Interproximal Finishing and Contouring System has been expanded to include specialty strips for difficult-to-access subgingival areas. The new subgingival kit pr...
