Komet 868B is a depth marker for veneer technique. Tapered. Cutting depth - Matches 868 diamond preparation instrument. Other features and benefits include:
L1 in mm: 7.0 mm
Maximum Speed: 16,000
...
838M is a diamond round cylinder bur with a modified shoulder and long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Ma...
Tapered chamfer short.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Techni...
Komet's 392EF is an interproximal trimming "mosquito" needle-shaped diamond bur. Extra Fine (25 µm) diamond grit.
Other features include:
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 5.0 mm
Max...
Komet's 8889 is a flame-shaped (needle) small preparation diamond bur. Fine grit, 46 microns.
For micropreparation, consider using 889M Small Flame Micropreparation Diamond Bur.
Indications for Us...
Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR-Diamonds™
Offering...
Komet's 5847 is a tapered shoulder, super coarse (180 microns) diamond bur for preparing the tooth for a shoulder crown preparation. Matches H375 carbide finisher series.
Due to its small size the ...
Komet's 8888 is a feather edge slim diamond bur.
Size: 012
Size Ø: 012 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 300,000
Indications for Use
Crown preparation.
Looking for a way to easily s...
Komet's FS9 (H135) is a facial surface trimming carbide bur. Matches 8859/FSD9F diamond series. FS9 (H135) is a tapered cone, fine carbide (8 blades, red band) with a working length of 9 mm. Other ...
Affinity™ InFlex Maximum Support Tray Material is the only support tray material designed for the dual-arch impression technique and specifically to prevent the impression distortion so commonly as...
The Garrison Quad Matrix Ring features an all-new asymmetrical ring design with specialized ‘driver-tip’ that maximizes adaptation and cervical seal. Other features and benefits include:
Adapting...
Komet's 9641M is a medium-grit extra-oral acrylic polisher. Comes in a 5-pack. 9641M is a part of the 4543 Acrylic Polisher Kit. Other features:
Recommended Speed: 6,000
Size: 100
Size Ø: 10...
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
801M is a diamond bur, round, with a long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications
Size: 010
Size Ø: 010 1/10 mm
Maximum Speed: 160,000
Indications for U...
889M is a lance-shaped (small flame) diamond bur with a slim neck ideal for micro preparation. Medium grit, 107 microns. Available in FG and FGSS shanks.
Specifications:
Size: 007
Size Ø: 007 ...
Komet's 845 is a flat-end taper diamond preparation bur for inlay/onlay preparation. Medium grit, 107 microns.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way ...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's 858 is a needle-shaped diamond bur. Medium grit, 107 microns.
Ideal for occlusal onlays, the separation step: Prepare the interproximal region with the separating instrument 858 in an axial...
The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...
Use 3M™ Comply™ Steam Chemical Indicator Strips as an internal pack process indicator to verify exposure to all 121 - 134ºC (250 - 273ºF) gravity and vacuum assisted steam sterilization cycles.
Tu...
Komet's 9644F is a fine-grit, extra-oral polisher for high-shine polishing of plastic/acrylic dentures. Comes in a 5-pack. 9644F is a part of the 4543 Acrylic Polisher Kit. Other features of the pr...
Komet's 305 mandrel is used for discs, polishers and brushes. Other features include:
Made from stainless steel
Sizes: 050 (050 1/10 mm) and 080 (080 and 1/10 mm)
Maximum Speed: 15,000 for the siz...
S6837KR is a modified parallel shoulder 151-micron grit diamond bur. The rounded corners of S6837KR prevent the formation of micro cracks. L1 in mm: 8.0 mm. Matches H158 carbide finisher series.
Cr...
Komet's 8845KR is a modified taper diamond bur with a round edge for inlay/onlay preparation. Fine (red band), 46 microns.
Indications for Use
Inlay and onlay preparation.
Looking for a way to easi...
Tapered chamfer. Other features and benefits include:
L1 in mm: 8.0 mm
Angle: 2°
Indications for Use
Crown and veneer preparation
Looking for a way to easily switch to Komet burs? Download and t...
Clearfil Majesty Posterior is a light-cure, nano-superfilled, radiopaque restorative composite resin composed of nano and micro inorganic filler treated with a proprietary new surface coating techn...
Modified cylinder short.
Indications for Use
Cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:
Click Here
Clinical Tech...
The 8852 bur is also referred to as FSD6F bur (facial surface trimming bur, 6 mm, fine).
Komet's 8852 (FSD6F) is a tapered point, fine grit (red) facial surface trimming diamond.
Matches H134/FS6 c...
