ZR8801L is a round diamond bur for grinding all types of ceramics, including zirconia. ZR8801L is a part of the ZR-Diamonds™ series. Available in FGL (Friction Grip Long) shank.
Size: 010
Size Ø: ...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's H269 is a tapered tungsten carbide bone cutter bur also known as a Lindemann bur. Oral and maxillofacial surgeries.
Indications for use:
Bone cutting: Lindemann burs are used for aggre...
Komet's 857 tapered diamond with a safe round end has a medium grit.
Indications for Use
For refining and finishing the access preparation, without damaging the floor of the pulp chamber.
Looking f...
Komet's 5858 is a pointed, thin, and tapered super-coarse diamond bur for facial surface trimming, interdental separation, and breaking contact.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 8.0 m...
Komet's 6835KR is a cylinder-shaped modified short diamond bur with the coarse grit (green band). Features rounded edge. Available in three sizes in FG (Fiction Grip) shank.
Indications for Use
Cav...
856P is a tapered chamfer, round diamond bur. Creates a cutting depth of 0,30 mm (size 016), 0,38 mm (size 018) or 0,54 mm (size 021) at the crown margin.
Maximum Speed: 160,000
Angle: 2°
Cro...
Komet's 8951KR is a modified tapered shoulder diamond preparation bur featuring longer total length and special mid-sizes. Fine grit, 46 microns (red band).
L1 in mm: 8.0 mm
Angle: 2°
Indicat...
Komet's 830AM is a long neck diamond bur for micro preparation, pear-shaped. Medium grit, 107 microns.
Micro pear tip
Medium grit 107 microns diamond
L1 in mm: 2.7 mm
Maximum Speed: 160,000
Indic...
Modified cylinder short.
Indications for Use
Cavity preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:
Click Here
Clinical Tech...
Komet's 822 is a diamond preparation bur with a small pear-shaped head. Medium grit, 107 microns.
L1 in mm: 2.0 mm
Maximum Speed: 450,000
Indications for Use
Cavity preparation.
Looking for ...
955EF is an extra-fine grit (yellow) pointed diamond used for facial surface trimming. Sometimes referred to as FSD3EF.
Matches H132/FS3 carbide finisher bur. For more coarse version of this bur se...
KS3SC is a parallel chamfer diamond prep bur. Matches H881U carbide prep series.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a K...
Komet's ZR6881 is a coarse, cylinder round-shaped diamond bur for cutting all-ceramics. Part of the ZR-Diamonds™ series. It's one of the best-selling Komet diamond burs.
The ZR6881 is ideal for gro...
Crosscut tapered fissure.
Indications for Use
Oral surgery, cavity preparation or crown and bridge technique.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur C...
The 8801 is a fine grit round finishing diamond. For the finishing step in the filling procedure.
Also available in other grits:
801EF (extra-fine) diamond bur
6801 coarse grit diamond bur
801 med...
Komet's 813 is a double inverted cone diamond bur. Medium grit (107 microns). For a longer doubled inverted head, choose 806 double inverted long diamond bur.
Indications for Use
Cavity preparation...
Komet's KS0F is a parallel chamfer diamond bur with the fine grit (46 microns) and a fiction grip shank. A part of the KS Diamonds series.
Size: 010
Size Ø: 010 1/10 mm
L1 in mm: 7.0 mm
Ma...
8849P is a round-end taper pin diamond bur with fine grit (46 microns). Creates a cutting depth of 0.43 mm at the crown margin. Additionally, used during occlusal onlays prep to work on oro-vestibu...
S6801 Round - Matches H41 Round Tungsten Carbide Operative Bur.
Cavity Preparation | S-Diamonds®
In dental surgery, the primary preparation of crown cores is one of the most time-consuming steps du...
Komet's 5909 is a round edge wheel super-coarse diamond for mesial occlusal distal (MOD) gross reduction.
Size: 040
Size Ø: 040 1/10 mm
L1 in mm: 1.3 mm
Maximum Speed: 100,000
T: 1,2 mm
Indicatio...
Komet's 801EF is an extra-fine grit round finishing diamond.
Also available in other grits:
8801 fine diamond finishing bur
6801 coarse grit diamond bur
801 medium grit preparation diamond bur
In...
Komet's FS4 / H133 is a tapered point, (8 blade / red) carbide used for composite finishing. Matches 8956/FSD4F diamond series. Other features and benefits include:
Non-cutting tips minimize tissu...
Komet's ZR8850 is a tapered long diamond bur. Fine grit (red and white bands), 46 microns. For grinding all types of ceramics, including zirconia.
Size: 016
Size Ø: 016 1/10 mm
L1 in mm: 10....
ZR8379 is an egg-shaped diamond bur for grinding all types of ceramics including zirconia. Fine grit.
Size: 014
Size Ø: 014 1/10 mm
L1 in mm: 2.8 mm
Maximum Speed: 450,000
This ZR egg-sha...
Konet's H1S is a round tungsten carbide bur with a high-efficiency cutting design.
Indications for Use
Crown and bridge technique, cavity preparation.
Looking for a way to easily switch to Komet bu...
Komet's 379XC Deep Purple™ is an egg/football-shaped diamond bur for occlusal/lingual reduction featuring extra-coarse grit. Matches 8379 diamond series and H379 carbide finisher series.
Crown Prep...
Pointed.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Technique
Technic...
94028M is a pre-polisher wheel (step 1) and a part of the two-step composite polishing system interspersed with diamond grit. RA shank, comes in a pack of 5, pink.
Flexible Footsie™ polishers featu...
