Komet's 859 surgical diamond bur matches H135/FS9 carbide finisher series. Has a needle shape and features a medium grit.
Indications for Use
Oral surgery, crown preparation, crown and bridge techn...
Komet's 5847KR is a super-coarse (180 microns) modified tapered shoulder diamond bur. Matches H336 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 8957 (US Numbers OSD3 and OSD2) prep diamond matches H247/OS2, OS3 carbide finisher series. 8957 (OSD3, OSD2) has a fine grit (red band), 46 microns.
Indications for Use
Working on filling...
The 379 diamond bur is medium grit, football/egg shaped and used for occlusal adjustments.
Matches the following carbide finishers: H379 and H379Q.
Indications for Use
Crown and bridge technique, ...
Komet's H48LQ is a tungsten carbide finisher for use on facial/labial surfaces.
Unique cross-cut design is pressure sensitive, allowing for the same bur to remove the bulk and finish the surface...
Komet's H246M is the Midwest Version (MWV) tungsten carbide finishing bur which has a gold coated shank and is a flame-shaped with 12 blades.
The US numbers for H246M sizes are:
H246M.009 is th...
Komet's H2 is an inverted cone-shaped tungsten carbide used for cavity prep.
Bur sizes and corresponding Komet numbers. Shanks may vary:
#33 1/2: H2.006
#34: H2.008
#34 1/2: H2.009
#35: H2...
Komet's 5835 is a cylinder short diamond bur. Super coarse, 180 microns. Available in a Fiction Grip shank (FG) and Fiction Grip Short Shank (FGSS).
Indications for Use
Cavity preparation for inlay...
Modified tapered shoulder - matches 847KRXC Deep Purple™ diamond preparation bur and 8847KR diamond series - 12 blades, normal.
Indications for Use
Crown preparation.
Looking for a way to easily sw...
The Komet 6379 is an egg-shaped diamond preparation bur. Matches H379 carbide finisher series.
Size: 023
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 300,000
Indications for Use
Cr...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
Tapered chamfer short.
Indications for Use
Crown preparation.
Looking for a way to easily switch to Komet burs? Download and then print a Komet Bur Conversion Card here:Click Here
Clinical Techni...
Komet's 8889 is a flame-shaped (needle) small preparation diamond bur. Fine grit, 46 microns.
For micropreparation, consider using 889M Small Flame Micropreparation Diamond Bur.
Indications for Us...
Komet's FS6Q (a.k.a. H134Q) is a facial/labial tungsten carbide bur with a cross-cut toothing, a part of the Q-Finishers® line - tungsten carbide finishers that reduce your composite restorations f...
Komet's 5847 is a tapered shoulder, super coarse (180 microns) diamond bur for preparing the tooth for a shoulder crown preparation. Matches H375 carbide finisher series.
Due to its small size the ...
Komet's 6881 is a parallel chamfer diamond bur. Coarse grit (green band), 151 microns. Matches H339 carbide finisher series.
Indications for Use
Crown preparation.
Looking for a way to easily swit...
Komet's 8888 is a feather edge slim diamond bur.
Size: 012
Size Ø: 012 1/10 mm
L1 in mm: 8.0 mm
Maximum Speed: 300,000
Indications for Use
Crown preparation.
Looking for a way to easily s...
Komet's FS9 (H135) is a facial surface trimming carbide bur. Matches 8859/FSD9F diamond series. FS9 (H135) is a tapered cone, fine carbide (8 blades, red band) with a working length of 9 mm. Other ...
Komet's 15802 is a round-end tapered, coarse grit (green) diamond used for reaming and endo access cavity preparation.
The 15802’s unique shape has a round-end for initial access and the diamond ta...
Komet 868B is a depth marker for veneer technique. Tapered. Cutting depth - Matches 868 diamond preparation instrument. Other features and benefits include:
L1 in mm: 7.0 mm
Maximum Speed: 16,000
...
Komet's 8881 is a parallel chamfer diamond preparation bur. Fine grit (red band), 46 microns. Matches H339 carbide finisher series.
Indications for Use
Crown Preparation.
Looking for a way to easi...
838M is a diamond round cylinder bur with a modified shoulder and long neck ideal for micro preparation. Medium grit, 107 microns.
Specifications:
Size: 007
Size Ø: 007 1/10 mm
L1 in mm: 2.7 mm
Ma...
889M is a lance-shaped (small flame) diamond bur with a slim neck ideal for micro preparation. Medium grit, 107 microns. Available in FG and FGSS shanks.
Specifications:
Size: 007
Size Ø: 007 ...
H1SE is a round tungsten carbide bur with a high-efficiency cutting design for excavating and cross-cut.
H1SE (blue) shows reduced vibration compared to conventional round burs.
Features sta...
Occlusal - cutting tip.
Composite | Q-Finishers
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an i...
Komet's 858 is a needle-shaped diamond bur. Medium grit, 107 microns.
Ideal for occlusal onlays, the separation step: Prepare the interproximal region with the separating instrument 858 in an axial...
Komet's ZR6801 is a round diamond bur for grinding all types of ceramics, including zirconia. Also is used for endo access. ZR6801 is a part of the ZR-Diamonds™ series.
ZrO2 | ZR-Diamonds™
Offering...
Komet's 379EF is an egg/football shape diamond with an extra-fine grit (25 microns). Perfect for occlusal/lingual reduction. Matches H379 carbide finisher series.
Indications for Use
Working on fil...
Komet's FS6 (H134) is a facial surface trimmer with a safe-end tip. Features 8 blades, normal. Matches 8852/FSD6F diamond series. Also available as a fine facial surface trimmer - FS6F (H134F).
Spe...
The H35L crown cutter features a special blade geometry that permits cutting through non-precious metal and gold with minimal effort. Its slim neck simplifies work along the entire length of the in...
Komet's H34L is an intra-oral tungsten carbide crown remover used to quickly and easily remove metal and non-precious metal crowns and appliances. Apply crown remover at an angle of 45° to the crow...
