Komet's H379AGK is a football tungsten carbide bur for palatal adhesive removal during orthodontic debonding procedures. It features a safe end and golden shank. Other features and benefits include...
Komet's H379Q is a football-shaped tungsten carbide bur with unique cross-cut toothing that makes palatal/occlusal adjustments, composite finishing, and debonding more accurate and efficient.
Until...
For cutting through full metal and PFM restorations during endodontic access. Golden shank.
Apply the crown remover at an angle of 45°.
Indications for Use
Crown removal.
Looking for a way to easil...
H41 Round - Matches S6801 S-Diamond Round Preparation Bur
12-24 blades depending on size.
Indications for Use
Working on fillings.
Looking for a way to easily switch to Komet burs? Download and th...
Pear long - 12 blades, normal. Matches S-Diamond S6830L. Other features and benefits include:
L1 in mm: 4.4mm.
Max. RPM: 450,000.
Indications for Use
Cavity Preparation.
Looking for a way to eas...
Komet's H48L is a feather edge, finishing and trimming carbide bur for debonding and composite finishing. 12 blades, fine. Matches 862 diamond series (for example, 8862 Feather Edge Diamond Bur, fi...
Komet's H48LQ is a tungsten carbide finisher for use on facial/labial surfaces.
Unique cross-cut design is pressure sensitive, allowing for the same bur to remove the bulk and finish the surface...
Labial, extra long.
Until recently, composite restorations required three finishing steps, using standard, fine, and ultra-fine finishing instruments. Incorporating an innovative toothing structure...
The H4MCL is a carbide cutter ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal structure without requiring instrument c...
The H4MCXL is a tungsten carbide crown cutter for metal and ceramics. Ideal for cutting PFM and hard-metal crowns. This ingenious instrument cuts through ceramic veneering and the underlying metal ...
The most popular #330 pear-shaped tungsten carbide bur.
Komet's H7 (330) has a pear shape that is very effective for minimally invasive cavity preparations, ensuring that there isn’t too much tooth...
The H71E is a carbide cutter used on acrylics, plaster and metal alloys. Sold Individually. Other features and benefits include:
Long service life due to the high number of blades.
Designed with s...
For acrylics, plaster and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 060 1/10 mm
L1 in mm: 12.0 mm
Maximum Speed: 50,000
Indications for Use
Acrylic technique....
Carbide milling cutter SGFA
For quick processing of dry and moist plaster
The further development of the proven, super-coarse SGFA toothing guarantees safe and high-quality work. The combination of...
For acrylics, plaster and metal alloys. Sold individually.
Technical Details
H73E: Technical Details.
Configurations
Handpiece Shank:
H73E.HP.012: Sold Individually (Item Number: 336...
For acrylics and metal alloys. Sold individually. Other features and benefits include:
Size Ø: 023 1/10 mm
L1 in mm: 4.2 mm
Maximum Speed: 100,000
Indications for Use
Crown and bridge technique.
...
For precious metal alloys - ultrafine staggered toothing. Sold individually. Other features and benefits include:
Size Ø: 014 1/10 mm
L1 in mm: 3.1 mm
Maximum Speed: 100,000
Technical Details
C...
For non-precious metal, precious metal and model cast alloys. Sold individually.
Tungsten Carbide Cutters | UM
Komet® UM-Cutters® combine three different types of toothing in a single instrument, e...
Carbide milling cutter ACR
For the rough processing of denture plastics. Sold individually.
The designation ACR stands for acrylic-based materials on which the milling cutter is used. The milling c...
For acrylics, plaster and metal alloys.
Indications for Use:
Crown and bridge technique.
Technical Details
H77E: Technical Details.
Configurations
HP/Handpiece Shank:
H77E.HP.014: Sol...
For acrylics and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Clinical Technique
Milling cutter H77EF ideal for exposing the preparation margin.
Tech...
Carbide cutter FSQ for all hard or elastic acrylics and precious metals.
FSQ milling cutters have high-performance teeth with a cross-cut and are suitable for all hard or elastic acrylics and preci...
Carbide milling cutter GSQ
For processing soft materials such as silicone and soft acrylics.
Whether working out or fine-tuning temporary restorations or soft plastics in the laboratory – the high-...
For gross reduction of non-precious metal alloys.
Tungsten Carbide Cutters | NE
The distinctive appearance of these Komet® cutters is the first indication of their unique qualities. The special bla...
For non-precious metals, precious metals and model-cast alloys. Sold individually.
Tungsten Carbide Cutters | UM
Komet® UM-Cutters® combine three different types of toothing in a single instrument,...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H78E: Technical Details.
Configurations
HP/Handpiece Shank:...
Carbide milling cutter ACR
For the rough processing of denture plastics.
The designation ACR stands for acrylic-based materials on which the milling cutter is used. The milling cutter is very easy ...
Carbide milling cutter DF
For controlled roughening of metal frameworks that are then veneered with ceramic. The fine diamond teeth with their pyramid-shaped cutting tips create a special surface o...
For acrylics, plaster and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H79E: Technical Details.
Configurations
HP/Handpiece Shank:...
For acrylics and metal alloys. Sold individually.
Indications for Use
Crown and bridge technique.
Technical Details
H79EF: Technical Details.
Configurations
HP/Handpiece Shank:
H79EF....
Carbide cutter FSQ for all hard or elastic acrylics and precious metals.
FSQ milling cutters have high-performance teeth with a cross cut and are suitable for all hard or elastic acrylics and preci...
Carbide milling cutter GSQ
For processing soft materials such as silicone and soft acrylics.
Whether working out or fine-tuning temporary restorations or soft plastics in the laboratory – the high-...
Carbide milling cutter GTI
For machining titanium and titanium alloys.
With a smaller number of cutting edges and the coarse cross-serration, a particularly aggressive cutting behaviour is achieved...
For gross reduction of non-precious metal alloys.
Tungsten Carbide Cutters | NE
The distinctive appearance of these Komet® cutters is the first indication of their unique qualities. The special bla...
For smooth reduction of non-precious metal alloys - high-efficiency cutting design.
Tungsten Carbide Cutters | NEF
These cutters are manufactured with a multitude of ergonomically designed, nick-fr...
For non-precious metal, precious metal and model cast alloys.
Tungsten Carbide Cutters | NEX
Cutters with NEX toothing combine maximal substance removal with a long service life. The cutters are pa...
Safety toothing with a twist to the left - working on plaster. Sold individually. Other features and benefits include:
Size Ø: 070 1/10 mm
L1 in mm: 14.0 mm
Maximum Speed: 30,000
Indications for...
Carbide milling cutter SGFA
For quick processing of dry and moist plaster
The further development of the proven, super-coarse SGFA toothing guarantees safe and high-quality work. The combination of...
For non-precious metals, precious metals and model-cast alloys. Sold individually.
Tungsten Carbide Cutters | UM
Komet® UM-Cutters® combine three different types of toothing in a single instrument,...
H7S tungsten carbide bur is pear-shaped with a high-efficiency cutting design ideal for excavating.
L1 in mm: 1.8 mm. Maximum Speed: 450,000.
Bur numbers and corresponding Komet numbers:
#330 1/...
