Clinician's Choice® Max Etch 35% Phosphoric Acid

CRD Item Number: 345503

Manufacturer SKU: 345503

Shipping calculated at checkout.
This is a pre order item. We will ship it when it comes in stock.
Add To Wishlist

Clinician's Choice® Max Etch has a 35% concentration of phosphoric acid, which represents the gold standard in achieving a consistent, micro-mechanically retentive enamel and dentin surface for virtually all bonding procedures.

The flowability and rich blue colour of Max Etch allows for precise placement, including occlusal grooves, yet it is viscous enough to prevent migration. Max Etch is also self-limiting in its depth of etch (average depth of 1.9μ with 20-second etch).

In addition, Max Etch rinses quickly leaving behind a clean, etched surface with no residual pigment or filler to affect the adhesive integrity.

Try-It Guarantee

Restoration technique with the use of Clinician's Choice® Max Etch 35% Phosphoric Acid

Dentistry and photography courtesy of Dr. Robert Margeas.


  1. After caries removal and placement of the matrix band and wedge, thoroughly clean and dry the preparation.

    After caries removal and placement of the matrix band and wedge, thoroughly clean and dry the preparation.
  2. Liberally apply Max Etch Phosphoric Acid to the preparation and etch for 15 seconds.

    Liberally apply Max-Etch Phosphoric Acid to the preparation and etch for 20 seconds.
  3. Rinse the Max Etch for a minimum of 5 seconds or until visibly clean. Scrub G5 All-Purpose Desensitizer onto the preparation for at least 10 seconds, blotting any excess. Leave the surface visibly moist.

    Rinse the Max-Etch for a minimum of 5 seconds then scrub G5 All-Purpose Desensitizer onto the preparation for 10 seconds, blotting any excess. Leave the surface visibly moist.
  4. Apply MPa Max adhesive (ensuring each adhesive wall is coated) and gently scrub for 10 seconds. Thin and air dry using ¼ to ½ air pressure to evaporate the solvent, for 10 seconds. The preparation should appear shiny with no pooling.

    Apply MPa Max adhesive (ensuring each adhesive wall is coated) and gently scrub for 10 seconds. Thin and air dry using ¼ to ½ air pressure to evaporate the solvent, for 10 seconds. The preparation should appear shiny with no pooling.
  5. Light-cure for 10 seconds using a standard curing light with an output greater than 600 mW/cm² or 20 seconds if the output is less than 600 mW/cm².

    Light-cure for 10 seconds using a standard curing light with an output greater than 600 mW/cm² or 20 seconds if the output is less than 600 mW/cm².
  6. Proceed with placement and light-curing of the composite. A bulk-fill composite was used in this case.

    Proceed with placement and light-curing of the composite. A bulk-fill composite was used in this case.
  7. Use A.S.A.P. Pre-Polisher to remove surface scratches.

    Use A.S.A.P. Pre-Polisher to remove surface scratches.
  8. Apply light pressure using the A.S.A.P. Final High Shine Polisher to quickly bring an esthetic lustre to the restoration. 20 seconds should do it!

    Apply light pressure using the A.S.A.P. Final High Shine Polisher to quickly bring an esthetic lustre to the restoration. 20 seconds should do it!
  9. The final restoration: A combination of life-like esthetics and a strong, enduring dentin/enamel bond.

    The final restoration: A combination of life-like esthetics and a strong, enduring dentin/enamel bond.

Max Etch 5 mL Syringe (Item Number: 345503): includes 15 x Universal Needle Tips, 25G Blue.

Max Etch 30 mL Syringe (345302): includes 1 x 1.2 mL Empty Syringe.