Acteon® NEWTRON conservative and restorative dentistry Ultrasonic tips are used for inlays/onlays condensation and root canal post loosening. The 5AE tip is recommended for loosening root canal posts. It may be necessary to use the generator at maximum power for limited periods. In such cases, care must be taken to prevent overheating and damage to underlying and surrounding tissues.

Indications for Use

The 5AE tip, in combination with endodontic retreatment tips, is recommended for loosening root canal posts.

For use with Acteon NEWTRON Ultrasonic Generators.

Clinical Technique

The 5AE tip is applied against the lingual and buccal surfaces fi rst, ending with the occlusal surface. The fl at end of the tip is held fi rmly against the tooth.

The 5AE tip is applied against the lingual and buccal surfaces fi rst, ending with the occlusal surface. The fl at end of the tip is held fi rmly against the tooth.

The tip is applied against the lingual and buccal surfaces first, ending with the occlusal surface. The flat end of the tip is held firmly against the tooth. This tip has a spray orifice that makes it possible to cool the operating field and prevent heat from being transmitted to the prosthesis and the underlying tooth.

Configurations

5AE Post Loosening tip with spray (Item Number: 820249): 1 ea.

FAQ

Q: How do I change (or place) the tip?

A: The tip threads onto the end of the autoclavable handpiece (AHP). The tip-enclosing wrench provided prevents you from having to touch the actual tip. You orient the slot in the wrench around the base of the tip, press the wrench into place, and turn the tip counter-clockwise to loosen the tip. The tip should always either be applied on the AHP or inside the wrench. First, hand tighten a tip to the handpiece. Then align the hole of the wrench to the flat sides of the tip and press down. The wrench will lock into place. Now unscrew the wrench and the tip remains inside, helping prevent the loss of tips or injuring hands and fingers. Hand tightening only needs to be done the first time using the device or acquiring new tips and wrenches. The tip should remain in the wrench unless it’s in use. The torque wrenches have a special design that will prevent over-tightening of the tip on the AHP. When the tip is tight on the AHP, continue to force the wrench in a clockwise motion until you hear an audible “click”. You will then know the tip is sufficiently tight on the AHP. DO NOT DO THIS WITH THE FLAT COLOUR-CODED WRENCHES.

Q: Can I sharpen these tips?

A: No. These tips are not to be altered in any way. Sharpening these tips will negatively affect the tip’s ability to vibrate properly.

Q: How long do the tips last?

A: Most users experience at least 6 – 9 months of use prior to having to replace a tip due to its wear. ACTEON offers the widest variety of NEWTRON tip designs and manufactures the thinnest perio tips on the market. ACTEON was the first company to develop tips with an internal coolant spray, diamond coated tips and pure titanium tips for implant maintenance. ACTEON manufactures NEWTRON tips for all applications including:

periodontics
subgingival scaling
root planing
implant maintenance
biofilm disruption
cavity preparation
margin preparation
condensing of composites
endodontic retreatment
post and crown removal
apical surgery

Resources

View the Acteon Tips User Manual

View the Acteon Tips Ultrasonic dentistry compendium

Accessories

Recommended Torque Wrenches: Acteon Torque Wrenches

Acteon® Loosening Ultrasonic Tip Acteon® Loosening Ultrasonic Tip